Introduction
ZoomBoard
allows quick and accurate typing on Windows Mobile Pocket PC. Typing on this
keyboard is as easy as sliding finger on the screen.
Activation
If you set up ZoomBoard for the second time, you should make soft reset
on your device.
If you want to delete ZoomBoard: you need first to switch off Default_keyboard
option > make soft reset > uninstall program.
Downloadable
version of ZoomBoard is fully functional and has to be purchased and activated
for further usage after 14-day trial period.
To
activate:
- connect your device to
Internet+
- tap the on-screen button in the
center of the tray where the default Windows Mobile keyboard is, tap the
arrow in the tray there choose ZoomBoard, tap
123 button and there in the left upper corner of the keyboard the setting
button is. Tap it.
- tap About> Activate> type
into the empty field the activation code from the email you received from
VITO Technology after purchasing ZoomBoard, choose “I have Internet” and
press Activate button below.
In case you can't connect to Internet from your pocket PC, activation
will take more time:
- tap the on-screen button in the
center of the tray where the default Windows Mobile keyboard is, tap the
arrow in the tray there choose ZoomBoard, tap
123 button and there in the left upper corner of the keyboard the setting
button is. Tap it.
·
tap
About> Activate> type into the empty field the activation code from the
email you received from VITO Technology after purchasing ZoomBoard, choose “I
have no Internet” and press Activate button below. Carefully read instructions
on the screen. After you've performed the necessary action you will receive an
e-mail with the necessary instructions for completing your activation.
Note: as you can see on-line activation is much
easier than the off-line variant, which can take considerably more time. We
recommend you on-line activation.
If
you have any questions or problems regarding the activation process, please
contact our support at registr@vitotechnology.com.
Typing
To start typing on ZoomBoard choose
it by tapping the on-screen button in the center of the tray where the default
Windows Mobile keyboard is. ZoomBoard will appear
there as an application for typing.
ZoomBoard
looks like the usual keyboard but it works differently.
There are 3
different types of zooming:
|
Full zoom
zooms in the whole keyboard with letters |
Lens zoom
- appears above the keyboard |
Float
zoom - appears straight above the letter you press |
When you tap
the keys there appears a zoom (either flat, glass or i)
with the zoomed in letters under your finger. The key highlighted with red is
ready to type. Slide over the necessary letter until it gets red and release
finger to type this letter.
Blue button
in the bottom left changes the layouts.
Tap it and
change between the layouts you’ve chosen.
Shift
button 
(up arrow) changes register. Tap twice to
print only Capital letters (to switch to the upper case).
changes keys with
letters to keys with numbers and symbols, access the setting button 
Enter
button
.
Backspace
button 
to erase symbols; tap and hold to start quick
erasing of the text.
Control button.
The combinations of
keys with Ctrl and Shift are supported.
Settings
Tap to access setting button.
The options
are the following:
Language to
change language of settings
Layouts to choose the language layout
Smart Zoom to switch this option on or off.
When enabling
this option it is possible to zoom the pressed letters
either immediately or with a delay. If you need a zoom window to emerge right
away then you need at first stroke wait for the zoom to appear. After that the
zoom will come forward as quickly as you touch the screen. When you do not
touch the screen with keyboard for at least three seconds the zoom is going to
appear with the delay again.
When
disabling it the zoomed preview appears all the time with the same interval.
Default keyboard to set ZoomBoard as a default keyboard (If you
want to delete ZoomBoard: you need first to switch
off Default_keyboard option > make soft reset > uninstall
program.)
Zoom types to switch between full zoom, lens zoom, float zoom
or simple (without appearance of any zoom).
About to access the info about the version and
register info.
Contact
Us
If you have
any questions, comments or suggestions on ZoomBoard,
please email us at support@vitotechnology.com.